Did you know that more than 30% of garage doors need the springs to be replaced within the first 10 years? And that is a clear reminder that spring replacement is more common than you might think. But how much does garage door spring replacement cost?
To replace a garage door spring, you might expect to pay between $200 to $700 or more. However, the cost depends on various factors that you must know before getting replacement quotes.
Therefore, in this blog post, we will be disclosing all the facts regarding the cost to replace a garage door spring, no matter residential or commercial garage doors. And yes, you will get a total cost overview based on some industry quotes and analysis.
Read More: How to Replace Garage Door Springs – 7 Easy Steps!
What is the Average Garage Door Spring Replacement Cost?
According to the Forbes Home report, homeowners spend an average of $250 per spring replacement, which includes labor and materials.
The cost to replace a garage door spring typically ranges between $150 and $350 for a single door. For multiple garage doors, the cost can range from $275 to $700, depending on the number of springs and some other factors, too.
Here’s an example cost breakdown for a typical garage door spring replacement:
| Expense | Average Cost Range |
| Springs (One) | $200 – $300 |
| Labor (1–2 hours) | $75 – $150 |
| Travel Fees | $0 – $100 |
| Additional Charges (Cable/Drum change) | $50- $100 |
| Total | $150 – $250 |
This cost breakdown is shown for a single spring replacement. If you need to replace two springs, the other cost will be the same except for the additional cost of another spring.
However, it is always recommended to replace both side springs if there’re two springs in the garage door. Springs are typically installed in pairs and experience the same amount of wear and tear.
When you replace both springs, it ensures balanced tension, prevents uneven strain on the door, and reduces the likelihood of the second spring breaking shortly after the first. So, you should count for the replacement cost for two springs at a time.
6 Factors Affecting Garage Doors Spring Replacement Cost?
Different factors can affect the total cost to replace garage door springs. Here they are:
1. Number of Garage Doors
How many doors your garage has can obviously influence the total cost. Though you know this, we are giving you an idea.
| Number of Garage Doors | Average Cost Range |
| One Door | $150 – $350 |
| Two Doors | $275 – $700 |
| Three Doors | $450 – $1050 |
| Four Doors | $600 – $1400 |
The table above gives an overall idea for the replacement cost on average. If you have a single door, the cost will be lower compared to the cost for a double-door garage.
2. Type of Spring
For your information, for garage doors, typically there are two types of springs: extension springs and torsion springs. Each has different pricing due to design, durability, and installation complexity.
| Type of Spring | Average Cost Range |
| Extension Spring | $50 – $100 |
| Torsion Spring | $75 – $150 |
| Convert torsion to extension | $250–$500 |
| Convert extension to torsion | $400–$800 |
- Extension Springs: These springs are ideal for light-duty garage doors, mostly residential garage doors.
These are attached to either side of the door and stretch to provide tension. And they are relatively cheaper, around $50 to $100 without tax.
- Torsion Springs: These springs are seen mostly in the commercial garage doors. And suitable for heavy-duty garages. These are usually mounted above the door.
They are relatively more expensive, ranging from $75 to $150 excluding tax. And these springs last longer, around 10–15 years.
A study by This Old House confirms that torsion springs last 25% longer than extension springs due to their superior design. And these types of springs can support garage doors up to 500 pounds, ideal for heavy-duty applications. And if needed, you can also convert spring types from torsion to extension and vice versa. In that case, an additional charge might be added along with the total cost.
3. Number of Springs
Garage doors mostly have two to four springs. And it’s highly recommended by the experts to replace springs in pairs at a time, even if only one is broken, as the wear on the remaining spring can lead to premature failure.
| Number of Springs | Average Cost Range |
| Single Spring | $150 – $250 |
| Double Spring | $200 – $350 |
Why Replace Both Springs? Replacing both springs ensures balanced tension, prevents uneven wear, and reduces the frequent future repairs.
Get a Replacement Quote Online
A survey conducted by the International Door Association in 2023 indicates that replacing both springs can extend the lifespan of your garage door mechanism by up to 40%.
Though the cost to replace double or four springs might cost double, it’s definitely worth it.
4. Type of Garage Door
The type of garage door you have significantly impacts the replacement costs. Heavier doors, such as roll-up or sectional doors, often need stronger, more expensive springs—the torsion springs, of course. As a result, the overall cost is increased as well.
| Garage Door Type | Estimated Cost |
| Roll-Up Garage Door | $200– $400 |
| Sectional Garage Door | $150- $500 |
| Single-Panel Garage Door | $200– $400 |
| Swing-Up/Tilt-Up Door | $150- $300 |
A report by Cressy Door notes that spring replacement on sectional doors, while economical, costs more, such as $150 to $500, due to additional repairs for hinges and rollers. That is why, based on garage door types, the cost to replace door springs might vary.
5. Labor Costs
You might be thinking of DIY spring replacement to save the labor cost. But it’s not a good idea at all.
| Replacement Type | Average Labor Cost (hourly Rate) |
| Residential Door Spring Replacement | $75 – $150 |
| Commercial Door Spring Replacement | $100 – $300 |
Popular site Angi highlights that you can save around 3% repair cost in the long run by hiring licensed professionals, as they have the expertise and experience in proper alignment and installation.
So, it’s necessary to hire a professional to replace the garage door springs, though you might need to pay extra for labor charges. But you are paying for the years of expertise, skills and experience.
Labor charges vary based on location, experience of the technician, and the complexity of the job. Research shows labor costs in urban areas can be 15-20% higher than the national average due to increased demand and living costs.
Again, the labor cost to replace a garage door spring can also vary based on what type of garage door spring it is—residential or commercial. Labor cost to replace commercial garage door springs is relatively higher, like $100 to $300 than that of the residential door.
However, the labor cost in rural areas often includes travel fees of $50 to $150. On average, labor costs range from $75 to $150 per hour. And it might take around 30 minutes to 1 hour or 1 hour and half max to complete the replacement.
6. Location
Your geographical location largely affects the total pricing due to local labor rates and higher living costs. Urban areas typically have higher labor costs, while in rural areas, you might face an extra charge for transportation.
| Region | Single Spring Cost | Dual Spring Cost |
| Los Angeles | $700 | $1400 |
| New York | $275 | $550 |
| New Jersey | $275 | $550 |
| Florida | $350 | $700 |
| Colorado | $350 | $700 |
| California | $380 | $760 |
| Carolina | $360 | $720 |
| Canada | $215 | $430 |
| Phoenix | $340 | $680 |
| Arizona | $340 | $680 |
| Denver | $300 | $600 |
| Bay Area | $225 | $450 |
Raynor Door reports that service calls in rural areas may include fees to cover technician travel time, particularly for remote locations.
So, all of these vary the overall replacement cost. Oh! For your help, we have gathered a list of the cost of the garage door springs (parts), including VAT in different states. Along with this, the labor cost and other necessary fees will be included for the replacement cost.
From this table, you can get an overall idea about the cost of a garage door spring for single and dual springs for different locations. Whatever you say, on average, the cost ranges from $275 to $500. And most of these springs come with 3-4 years of warranty.
Recently, a person in New Jersey shared that he spent $400 to replace two springs along with 4 cable replacements. So, you can guess the expense.
Tips to Save Money on Garage Door Spring Replacement
- Get multiple replacement quotes and compare estimates from several reputable contractors to find the best price.
- Use springs with higher cycles. The longevity of springs is measured by cycles. Torsion springs typically last 10,000 to 30,000 cycles, and extension springs usually only last 5,000 to 10,000 cycles. So, based on your door usage, choose the springs.
- Go for the package replacement deal. If other parts, like cables or drums, need replacement, go for a bundle package, as package replacement deals cost comparatively lower.
Conclusion
Now, you got the idea for a garage door spring replacement cost. Whatever door you have, make sure to hire a professional to replace the door spring for durability and longevity. Though various factors affect the cost, on average, it will range from $150 to $400 for each spring replacement.
However, if you don’t want to take the hassle of buying the parts yourself and looking for some professionals to handle your garage door springs, Upstate Doors offers pretty affordable replacement deals with the best quality springs from trusted brands.
Frequently Asked Questions (FAQs)
1. How much does a garage door spring replacement cost?
The cost to replace a garage door ranges from $150 to $350 on average for a single spring replacement. Prices vary based on the type of spring, labor costs, and region.
2. Is replacing a garage door spring easy?
No, replacing garage door springs can be dangerous and complex. Torsion springs, in particular, require specialized tools and expertise. It’s best to hire a professional for safe replacement and proper spring alignment.
3. What is the lifespan of a garage door spring?
Garage door springs typically last 7 to 15 years, depending on usage frequency and maintenance. However, the torsion spring comparatively lasts longer than the extension spring.
4. Can I replace the garage door springs myself?
While you can replace extension springs yourself with proper tools, torsion springs are more complex and should be handled by professionals. Contact us now to get a replacement quote that fits your budget.
5. How long do garage door springs last?
High-quality springs like the torsion springs can last 10,000 to 20,000 cycles, translating to approximately 7 to 15 years almost. Contrarily, extension springs last 5000 to 10000 cycles, which indicates about 5 to 10 years. However, the longevity of the springs depends on the number of times the door is used per day.
6. Should I replace both springs even if only one is broken?
Yes, replacing both springs is highly recommended, even if only one spring is broken. Replacing both ensures balanced tension and reduces strain on your garage door system, minimizing future repair costs.
